Re: {Chrysler 300} 1962 - Intake Manifold Heat Flap?

Dave D.

On Mon, Oct 9, 2023 at 8:13 PM, Nick Taylor
<nicksgaragesd@xxxxxxxxx> wrote:

I'm pretty sure those were on with the valley pan when the engine was painted.

On Sun, Oct 8, 2023 at 11:51 AM 'Matt Allyn' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:
This aluminum piece that lives with the end bar for the intake manifold gasket….
Supposed to be painted engine turquoise or black?
Thanks

Matt Allyn
(562) 533-2551

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1674027165.12848913.1696791081370%40mail.yahoo.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFPHijwWQiEMaCyDqGCuaBTc%3DG7UokdfRb5HqZuhwUyq4A%40mail.gmail.com.