Re: {Chrysler 300} 300B Front Headlight.

You were correct it was hard as a rock. It also looked like it was already partly broken as there was only half of the ring on the light side.

Thanks

Zach Hietsch

On Oct 7, 2023, at 5:39 PM, Donald Verity <chryslerdon@xxxxxxx> wrote:

You broke it. That's a rubber grommet. It pushes through from the other side. It's probably hard as a rock too. The wires are crimped into it, so they can not come out. Usually if you want it correct, you will have to find a good assembly.
Don

Hello All,

I am trying to remover the wires of the front headlight. Did I break this and what’s the right way to take it apart.

Should I just take all the screws out?

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/9748015B-8701-45B0-9B41-22E7A5D6AF70%40gmail.com.

Thanks
Zach Hietsch

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/9748015B-8701-45B0-9B41-22E7A5D6AF70%40gmail.com.