Hello All, I see a green wire connected to the black wire terminal on the ammeter, but this doesn’t seem to be in the wiring diagram. I see a grey wire that is supposed to connect from the red ammeter terminal to the clock. If this is true, what is this green wire for? I think I connected it in the past, but I am not sure if it is correct. Thank you! Mark Lindahl PS-Green wire has a rectangular black molded piece neat the terminal. -- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/15520CA0-3AC4-4057-955C-E6E31208D7F8%40sbcglobal.net.
-- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/15520CA0-3AC4-4057-955C-E6E31208D7F8%40sbcglobal.net.