Re: {Chrysler 300} Removing starter on 1960 300f

Tony Rinaldi

On Wednesday, September 27, 2023, 3:36 PM, Nick Taylor <nicksgaragesd@xxxxxxxxx> wrote:

George,

Here is the one I used. Yes, the 1959-61 engines use a different starter. I had to grind a little on the adapter ring for the starter but it was easy enough. The battery cable to the starter needs to be longer by about 6 inches. I used one from the relay to the battery and a second one from the relay to the starter. And then I just made a new signal wire. If you want original style battery cables, Quirey said they can make a longer set. I also put one of these on my 1960 Chrysler wagon. And a couple friends have done several of them. Faster cranking and less draw on the battery. No problem starting my F after it sits for months.

https://www.qualitypowerauto.com/catalog.php?item=600&fbclid=IwAR24wVweStZaNs7PyScbDGu6uVa3NW5ARPEgtFKy4xz2OnP2DgoGyRr4rww

On Tue, Sep 26, 2023 at 4:51 PM George Kamarinos <georgekama@xxxxxxxxxxx> wrote:

Hi Nick, I wasn't aware that on the early 727 vast iron trans that you could use a mini starter.

Would it be possible for you to share the model number of the starter.

I was thinking of changing out the original one in my 300G.

Many thanks George

Get Outlook for Android

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> on behalf of Nick Taylor <nicksgaragesd@xxxxxxxxx>
Sent: Wednesday, September 27, 2023 3:50:47 AM
To: Bob Jasinski <rpjasin@xxxxxxxxxxx>
Cc: Michael Reed <rmreed@xxxxxxxxx>; Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} Removing starter on 1960 300f

The top starter bolt threads into the starter from behind. You access it from the transmission side.

I put a mini starter in my F and very happy with it.

https://photos.app.goo.gl/Bb9NDYboiqD9ivV46

On Tue, Sep 26, 2023, 10:42 AM Bob Jasinski <rpjasin@xxxxxxxxxxx> wrote:

Marylin,

It’s been a few years since I had the starter out in my G, but I do remember using a long extension with a 5/8” (I think) socket and going over the top of the starter to reach the bolt. The F should be very similar.

Bob J

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of Michael Reed
Sent: Tuesday, September 26, 2023 9:51 AM
To: chrysler-300-club-international@xxxxxxxxxxxxxxxx
Subject: {Chrysler 300} Removing starter on 1960 300f

Hi. Marilyn Reed here. I need to remove the starter on my 60 300f to have it rebuilt. We are having difficulty removing the top bolt. Is there a special way to do this? Any guidance is greatly appreciated.

Thank you.

Marilyn

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1473585836.861943.1695747043986%40email.ionos.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/00da01d9f0a0%24b595fe80%2420c1fb80%24%40comcast.net.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFNGf6%3DE4gpx%3DcEDZkpa4fHbeF0N6%2BeS%3DnSF-SzgsiKugQ%40mail.gmail.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFM9fjF_JGTbJQpMVNekoNuhvjn2OM-HkHF_u8g2%2Bu2P1w%40mail.gmail.com.