Re: {Chrysler 300} 1964 300K atuo

On Thursday, August 31, 2023 at 02:10:21 PM EDT, Bob Merritt <bob@xxxxxxxxxxxxx> wrote:

Hi Harry;

Yes there is a lamp. It is a GE 57.

On the driver side of the console, there is a notch cut in the lower section

so you can get your hand in there. The notch is covered by the console carpet.

I can take pictures if you need.

Bob

On 8/31/2023 12:27 PM, torg66 wrote:

Hi, members, Is there a light blub in the floor shift selector panel? and if so how to replace?

Thanks

Harry Torgeson

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/4596edfd-2928-4bec-9df3-3db19cc74c2en%40googlegroups.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/641291b0-4a88-605b-f69a-ba57832ff9ae%40simplexco.com.