Base Coat/Clear Coat is my preference. It’s much easier to repair if you get scratches or chips (which you will get). Gloss levels can be controlled by the level of wet sanding and buffing that you do. Clear coat offers better UV protection. I prefer the Dupont (Axalta) paint system. Ron From: chrysler-300-club-international@xxxxxxxxxxxxxxxx On Behalf Of Jim Birr My 300-F is finally ready for paint! Need to choose single state or two stage paint. Going with original Alaskan White color. I know some of the pro's and con's and think I know which way I'm going to go but am interested in comments thoughts from everyone out there. Jim -- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/002701d9d955%241d7c4030%245874c090%24%40comcast.net. |