RE: {Chrysler 300} Need trunk weatherseal for 300H

Regarding door weatherstrip and trunk seal, I’ve had good luck with Restoration Specialties and Supply in Windber, PA. Their rubber is soft and has the correct shape. The trunk seal from Quirey tends to be a bit dense, causing trunk lids to stick up a bit.

Also, another idea is to use GM A-body trunk seal, which I purchased from Fusick Automotive. It was soft and fit perfectly in the channel of my 58 Plymouth’s trunk. Trunk lid lines up and closes perfectly.

NOTE: All my experiences are for 55-59 Mopars. For anything after that, best to order a sample beforehand.

Ron

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx On Behalf Of Rich Barber
Sent: Friday, July 28, 2023 2:42 AM
To: 'leslie miklas' <ldmiklas@xxxxxxxxxxx>; chrysler-300-club-international@xxxxxxxxxxxxxxxx
Subject: RE: {Chrysler 300} Need trunk weatherseal for 300H

I recall age-old “discussions” on new seals preventing the deck from closing properly. Even with good location, new seals may be a little thick for easy closure. Time, cycles and heat should produce a satisfactory closure. Remember to place the joint at the lower lip.

Rich Barber

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of leslie miklas
Sent: Thursday, July 27, 2023 9:20 PM
To: chrysler-300-club-international@xxxxxxxxxxxxxxxx
Subject: {Chrysler 300} Need trunk weatherseal for 300H

THANKS to ALL for their recommendations ! Got one coming from Quirey.

Jeff Miklas

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1482711908.901603.1690517974906%40connect.xfinity.com.