RE: {Chrysler 300} G power steering pump leak

https://www.amazon.com/Gates-351400-Power-Steering-Pump/dp/B000C2UEXY

See the gasket at the top. James

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of Loren Nelson
Sent: Monday, July 24, 2023 07:45
To: Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} G power steering pump leak

I had the power steering pump rebuilt by Lares and it was installed by my restorer. The pump reservoir had a leak and it was dripping oil off the bottom of the pump. The pump worked fine except for the leak. When I removed the pump I found the rear mounting bolt goes into the oil reservoir and the bolt I removed had red silicone sealer on the threads. It has been several years since I removed the pump and I can't remember it having a sealing washer or thread sealer on that bolt but it could have. I can't remember a lot of things anymore.

The FSM does not mention sealing that mounting bolt. Is the bolt supposed to go into the reservoir? If so, what is the recommended sealing method?

Thanks,

Loren Nelson in North Georgia

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CANvhwYYwkO_m5EahPPJ6tqEs73tJUQi2bZPFbn9FLcVN2cAfWQ%40mail.gmail.com.