{Chrysler 300} Re: F/G/H console attachment question

["'Keith Langendorfer' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Sorry - meant to attach this pic! 

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/905C57FB-0E0D-480B-94B9-C4E5974F476C%40yahoo.com.

> On Jul 16, 2023, at 7:24 PM, Keith Langendorfer <keith_a_lang@xxxxxxxxx> wrote:
> 
> Folks
> 
> Does anyone recall/know what screws/bolts were used to attach these to the floor pan ? Mine were inexplicably removed by the prior owner (or maybe the folks who put an MP3 jack into his radio - no clue). 
> 
> I tried a longish #10 sheet metal screw but I don’t think that’s what was used, although I could be wrong - maybe a smaller size?
> 
> Anyway, any help would be most appreciated. I have an original 1960 Mopar parts list binder but it doesn’t get into that level of detail.
> 
> Thanks in advance,
> 
> Keith

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/905C57FB-0E0D-480B-94B9-C4E5974F476C%40yahoo.com.