Re: {Chrysler 300} 1962 Odometer - Dumb Question....

[Nick Taylor <nicksgaragesd@xxxxxxxxx>]

Dumb answer...

...hook a motor up to the speedo cable and run it until it turns over to all zeros.

Real answer is you have to disassemble the dome to get to the odometer. 

On Sun, Jul 9, 2023, 9:55 AM 'Matt Allyn' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

If one wanted to reset the odometer to 00000; is the only way to remove the entire Astrodome?

I think the answer is yes, but didn’t know if there was a simpler way to get to the odometer.

Thanks!

Matt Allyn

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/89259D7D-3955-4855-BEF8-ABA7B5D19C5E%40yahoo.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFMD5s3TL-orjiqveepinPoYPHyNGJ%2Bar8-61CcPgZcHPQ%40mail.gmail.com.