{Chrysler 300} Broken Gas Pedal

["McCormick, Kevin" <Kevin_McCormick@xxxxxxxxxxxxxxxxxx>]

As a new member I have enjoyed following the discussions here, even if some are far above my primitive knowledge level. Also my thanks to Hank and all the members who so warmly welcomed me and shared their expertise at Hershey. I need to tap into that expertise to solve a new issue.

 

After an uneventful trip to and from Hershey and another to our family cottage in the Finger lakes, I ran into trouble in attempting to return. I realized I had the pedal to the floor just going up the hill of our driveway and I was creeping along. I managed to turn around at a nearby ice cream stand and get back down the hill to safe parking. I had limited time to study the problem but here are the few facts I have:

-the gas pedal just flops loosely but if pulled back to vertical causes some acceleration

-at the other end, starting at the carburetor things are tight and working, until I get back to near the firewall and below where I could easily reach, there things are loose

 

Forgive the ignorance revealed in the above description (and feel free to roll your eyes!) I can fix people, houses and sailboats but have light years to go on automotive repair. Until getting my K, I had no interest in the subject, but now I am anxious to learn.

When I get back to the car this weekend what should I be looking for? I am envisioning some kind of broken rod or is it a cable connection? Is it likely something I can access without a lift or should I just get it towed to a garage and hope someone there has seen a car of this vintage before?

 

Any and all assistance greatly appreciated.

 

Kevin R. McCormick

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/BN0PR07MB878248A7DF81D87FB8FF9F27B850A%40BN0PR07MB8782.namprd07.prod.outlook.com.