Metal valve stems may keep them from spinning off. Bob J From: 'James Douglas' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> Thanks Keith and George. What tires are you using? I am tired of chasing the hub caps. I may get a set of 15x7 something with a 4 inch backspace and call it a day as far as wheels go. The brand new 14-inch steel wheels on the car are fine, I am just not interested in restoring a set of factory hubcaps just to see them spit off. My folks ’64 300K used to lose a cap every now and then when new as well. So, I know it is a long term issues when the cars are driven daily or with sprit. James From: Keith Langendorfer <keith_a_lang@xxxxxxxxx> James I have 15x7” Dodge “Police Wheels” on our 300K without any issues. I did try 15x8” wheels on our ‘65 B Body and the outer perimeter would rub on the suspension in the front (no issues on rear fitment.) I don’t know if the same issue would occur on a C Body. Keith
-- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/094401d994d3%24cf972620%246ec57260%24%40comcast.net. |