Re: {Chrysler 300} 1962 Motor Mount Areas

[John Grady <jkg@xxxxxxxxxxxxxxxxx>]

i have seen terrible welding on front  sub frame , especially the motor mounts , often almost like a tack weld to cross member 1/2” long . Terrible QC when assembling frames , they vary like crazy also around the tabs for upper control arms .

Very good point , first thing to check on a restoration 

john g 

Sent from my iPhone

On May 28, 2023, at 10:17 PM, 'Matt Allyn' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

Today I pulled an incredibly great & worn 413!

Check out the comparison of the (good) passenger side motor mount area versus the (uh-oh) drivers side motor mount area.

Yikes!  Guess I need some welding done.

Matt Allyn

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/B5EB0831-FF49-43C2-91CA-DCB7A1E55F92%40yahoo.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/DAE79C0F-F456-4211-A60E-1A985B8D0C98%40gradyresearch.com.