Re: {Chrysler 300} Epoxy over spoke ends OEM wire wheels

My 1964 K has 15" wire wheels, had new tires put on them, could not see how the spokes were sealed, the rubber inner band covered the spokes. I have not had any leaks in 7 years. I think the later manufacturers used silicone, I did this on my MG wire wheels years ago and it worked.

Harry T

On Mon, May 8, 2023 at 12:27 PM dplotkin <dplotkin@xxxxxxxxxxxxxxxxxxx> wrote:

Asking the Great Wide 300 Nation about their experience with OEM wire wheels and the use of epoxy on the spoke ends to eliminate the need for an inner tube. Surely there's some experience out there with this idea?

Danny Plotkin

Sent from my Verizon, Samsung Galaxy smartphone

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/64594d1c.050a0220.7ea7b.48ffSMTPIN_ADDED_MISSING%40gmr-mx.google.com.