Dave & All: See: Page 2-8 at: Front Suspension Page (jholst.net) This suggests different torsion bars for ’64 Chryslers with the HD suspension—which was standard on ram K’s and optional on those with the Firepower 360 engine. Two ways to get stiffer springs—alloying or thickness. I’m guessing Chrysler chose the thicker option for the torsion bars as well as the anti-sway bars. In theory, torsion bars do not wear out or break as they are designed to operate at low enough stress levels to run forever. Damage, manufacturing defects and the overall difficulty of manufacturing crack-free steel may limit torsion bar life. I bought a new Valiant in spring of ’61 and had a torsion bar failure in Spring of ’63 after a few years of Omaha salt acting on an opening in the exterior coating on the bar. Pits or gouges on highly-stressed may raise stress levels by a factor of 5five near the pit. Classic conchoidal fatigue failure followed with the last cycle as I was backing out of a parking space. TBTG. Removed both ends of the bar and tootled off to the dealer for a warranty replacement. What experience have other readers had with broken/sagging torsion bars? Rich Barber Brentwood, CA—getting a late blast of cool air and rain in the Bay Area of CA.. From: 'Dave Dumais' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> Hi All, Come to the realization that my K torsion bars are original. When or do they need replacing over time? They have been out and greased a few years back. The 64 has a front sway bar and both 7 leaf rear springs. If so needed, what Vendor could supply? Thanks all, See you in Hershey. Dave D -- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/00d301d97e34%2409cd50f0%241d67f2d0%24%40ez2.net. |