{Chrysler 300} Hi/Low Speed Blower Motor Question

[Kurt Brueske <kurt.brueske@xxxxxxxxx>]

I am wrapping up a long-term dash restoration project and am working through verification of all components.  I have a question concerning the "resistor" depicted in Fig. 3 of the Air Conditioning section of the 1962 Service manual -- I've attached a picture.  The resistor serves as a means to regulate blower speed - either Low/High - by either pulling/pushing the knob on the temperature control lever.  Unfortunately, the resistor is MIA and was likely lost to time.  Does anyone know the specs on the resistor and where it would be placed once installed?

I appreciate any/all help!

Thanks,

Kurt

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/82795899-8240-4a09-a415-df0434536d81n%40googlegroups.com.

Attachment: Fig. 3 Electrical Control Circuits.jpg
Description: JPEG image

Attachment: Dash installed.jpeg
Description: JPEG image