Wayne,
That top bezel with the holes 180 degrees apart require a
special spanner tool. I made one from 1//4 steel that looks like a sling shot.
Then drilled hole through both sides at top of sling shot.
I think the hole was 1/16 or 3/32” for dowel pins of same
size, + a couple of 1000 for clearance. Hold the tool over bezel and push the
pins all the way into the provided holes from ea. side and turn to remove.
Applying heat can help to remove bezel.
Gary The Parts Doc
From: Wayne Bakewell
Sent: Monday, April 10, 2023 2:36 PM
Subject: {Chrysler 300} Removing power antenna 57
300c Does the top ring have a pin that is just
punched out with a small punch For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/SYCP282MB020794C18679CDACFA106964ED959%40SYCP282MB0207.AUSP282.PROD.OUTLOOK.COM. For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/005A8D2FC94943FCA7B334CBE551B8D3%40OwnerPC. |