{Chrysler 300} 300K A/C clutch diameter.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

{Chrysler 300} 300K A/C clutch diameter.



Hi All,

 

As far as I can tell the pulleys on the A/C are 6-1/4 inch OD. But I have noted that the actual clutch diameter on the one on the car which is clearly a reman is almost as large as the pulley in OD. The one on the bench that I got from John at Big M and he said came out of a ’64 the clutch OD is smaller by about an inch that the pulley OD.

 

Can anyone tell me if one or the other is correct and/or are there any performance differences between them?

 

 

Thanks, James

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB61713B3A41578D8C376BB33193889%40CY5PR19MB6171.namprd19.prod.outlook.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.