{Chrysler 300} Follow-up - Generator tags

[Noel Hastalis <cpaviper@xxxxxxxxxxx>]

Here's what I've come up with in my search for a generator tag for my just-rebuilt 300-F dual pulley generator #GJM-8202A. Thanks to everyone who sent me their suggestions.

• Quirey no longer has these in stock. Listed on Page 25 of Gary Goers' Catalog #10, as Part #510(C), these had sold out awhile ago and will not be reporduced by Quirey. One of our Club members had produced these for Gary and will not be reproducing them, since they're otherwise available.
• John Begian had a source in central Europe from whom he sourced a tag, but it's been radio-silent from that source from over 2 weeks ago.
• Nick Taylor recommends the following source that provides concours quality acid-etched tags, that are the correct size. Nick's message to me - 
  • A friend had one done. He said the ones on EBay are the wrong size and are just screen-printed. He said this place does it right but they are expensive.  Nostalgic Reflections - Automobiles, trucks, tractors and more! Page 4
    
  • The correct part number is CPS-0187, costing $185, unstamped.
  • I have not explored the EBay advertised site sourcing these.

I was able to purchase a correctly stamped one from Jeff Carter that he had acquired from one of our late West Coast Club Members about 8 years ago.

Noel

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/2001629657.2298989.1678987566526%40connect.xfinity.com.