Ok, I went through and did all the work on the 300K front end of the engine… New radiator, new correct clutch and fan, new water pump and the like… So, I go to slip the lower fan shroud in place and guess what? I cannot get it to slip into place. I do not want to chance hurting my new radiator by forcing it. My question to all is, can the lower shroud on a 300K be installed with everything else in place or do I need to take off the lower radiator hose and/or the fan and clutch to get in in? James For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB61715D226B2C6CFFAE18BD8293B89%40CY5PR19MB6171.namprd19.prod.outlook.com. |