{Chrysler 300} Temp Gauge issues
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

{Chrysler 300} Temp Gauge issues



I'm forwarding this for club member Mike Hassenplug who lives in Kansas.  He is not able to post on the list server.  Bob Merritt, I've also sent this to you so that you can add Mike to the server.

I'm not that versed on electrics.  Here is Mike's post to me.

The needle on my temp gauge on my 300 B jumps around like a rabbit on meth. Sometimes on the highway, it'll settle down and perfprn properly, but it'll go back to being spastic again. I suspect a wire, but the wire from the temp sensor appears ok, and it appears to go to the generator. Can you refer me to someone who could help?

John Lazenby

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1958129331.2584401.1677642586487%40mail.yahoo.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.