Re: {Chrysler 300} 1962 Throttle Linkage Question

["'Matt Allyn' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

(Now with the image…hopefully)

Matt Allyn

On Feb 13, 2023, at 1:21 PM, 'Matt Allyn' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

Hello All,

In my quest to put our ’62 300 Sport back together after a front end collision….

I have replaced all motor & trans mounts with new from Imperial Services; as the rubber had torn away from their steel cores upon impact.

I thought that would have fully restored and leveled the motor where it needs to live.

Yesterday I noticed that the Throttle Linkage was NOT 100% Horizontal on the Firewall.

The section that bolts to the Firewall, with its 3 bolts, is good.

But…

The Horizontal Rod that lives from Firewall & attaches to the top of transmission mount, with the plastic clip…

That Rod is slightly angled down.

In this image it seems 100% Horizontal.

I’m referring to “SHAFT 14-11-1”

<PastedGraphic-1.tiff>

Should that Horizontal Rod be 100% level?

If so I am doomed & need to investigate further where my issue is with the height of the drivetrain - Yay!

Thanks

Matt Allyn

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/DEBB87E9-6168-41A6-A1B5-554F5AC8984B%40yahoo.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/A8AA7BAA-3DED-4AD6-A9D9-8FC7C1699C63%40yahoo.com.