RE: {Chrysler 300} Just A Heads Up

["micke.sundbom" <micke.sundbom@xxxxxxxxx>]

They might have it in stock, think they make a few everytime depending of color....you need a black 57?  Tony might send it over for you on the spot!

Well worth talking to him..

You have it in 3weeks if lucky...

/M

Skickat från min Galaxy

-------- Originalmeddelande --------

Från: william ELDER <belder@xxxxxxxxx>

Datum: 2023-02-09 18:22 (GMT+01:00)

Till: 'Noel Hastalis' <cpaviper@xxxxxxxxxxx>, 'Chrysler 300 Club International' <chrysler-300-club-international@xxxxxxxxxxxxxxxx>

Ämne: RE: {Chrysler 300} Just A Heads Up

Thanks to all of you who suggested using the RD Autoline dash pad.  Mine is still in its box.  I did order it last May and it arrived in January.  To their credit, RD Autoline did not charge me any money until my new pad was ready to ship.  This was a good experience compared to some other supplier that I could, but won’t, mention.  I also want to thank all of you who replied with tips and suggestions from your experiences.

 

Regards

bill

 

From: Noel Hastalis <cpaviper@xxxxxxxxxxx>
Sent: February 8, 2023 4:34 PM
To: william ELDER <belder@xxxxxxxxx>
Subject: Re: {Chrysler 300} Just A Heads Up

 

Hi Bill,

 

Re your replacement dashpad, have you considered RD Autoline in Sweden? Their  replacment dashpads are top quality and looks as new. Several years ago, Mike Burke had brought over supplies of them - '60 and '61/'62 - but he's sold them all. I have one of them in my F.

 

RD Autoline's website - RD Autoline | Welcome to RD-Autoline, the company for those that demand the highest quality for your classic car

 

Noel

On 02/08/2023 2:58 PM william ELDER <belder@xxxxxxxxx> wrote:

 

 

I am replacing the dash pad on my 300G.  I read through the blog from Just Dashes to give me a leg up on this project.  I got to the rear view mirror removal, working through the speaker hole, even the radio is out.   I tried to get a 1 3/8 socket on the mirror nut.  Just dashes indicated that the nut was 1 3/8.  I just couldn’t get a socket on it, so I cut a perfectly fine 1 3/8 combination wrench in half, it was too long to fit inside the dash.   So after wasting a lot of time and effort, I finally realized the nut is 1 7/16.  Just in case any of you have to remove the rear view mirror.

 

Regards

bill

 

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/003501d93c00%24146043e0%243d20cba0%24%40cogeco.ca.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/001a01d93cab%2421da5050%24658ef0f0%24%40cogeco.ca.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/63e532c8.500a0220.9eee0.8c1f%40mx.google.com.