Re: {Chrysler 300} 64 300 valve stems 14" wheel

[Edward Mills <millserat@xxxxxxxxxxxxx>]

DONT MODIFY RIM HOLE. They are standard sizes. Modifying will reduce ability to seal and may cause leakage,

You can sand lightly if minor surface rust is present, but wheels are standard size to accommodate either 0.625 (TR415 or TR 425) stems or 0.453 (TR413, TR414, TR418, or TR423) valves. Dont be surprised if hole in wheel is slightly smaller than rubber of valve. Valves are designed to pop in and provide a compression seal - if rubber was same diameter as hole there would be no compression.

On 2/5/2023 2:12 PM, 'James Douglas' via Chrysler 300 Club International wrote:

Dave, That is .380 equals 9.652mm.  Take a look at the products in the catalog here: 31 Inc.  many of the stems are 9.7MM. I do not think the difference will cause an issue. A small reamer would take off that 0.048 inch if need be.

 

James

 

From: 'Dave Dumais' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Sunday, February 5, 2023 11:41
To: Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} 64 300 valve stems 14" wheel

 

A chilly hello to All,

 

The original 64 14" rims use the premier 8139  TR 413 valve stem.

 

The rim hole measured .380"

 

Who has completed this issue before me?

 

A lots of TR 413   stems listed, most rim holes larger than .380

 

Thanks 

 

Dave D.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1352728226.303865.1675626073208%40mail.yahoo.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB6171EB7C03A0343B47C77C0893D59%40CY5PR19MB6171.namprd19.prod.outlook.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/4f68de3c-f4f7-4095-5439-3be461c62047%40bellsouth.net.