On Friday, January 27, 2023, 8:48 PM, Ron Waters <ronbo97@xxxxxxxxxxx> wrote:
--Michael -What did you use to melt the Muggy Weld ? On the 55 Chrysler/Desoto vent wing frame, there is a pot metal extension piece used to anchor the assembly in place. This piece, shown in attached photo, sometimes snaps in half. I may try Muggy Weld to reattach that.Ron
From: Michael J Falcone [mailto:mjf175@xxxxxxx]
Sent: Friday, January 27, 2023 6:37 PM
To: info@xxxxxxxxxxxxxxxxx; ronbo97@xxxxxxxxxxx; bob@xxxxxxxxxxxxx; chrysler-300-club-international@xxxxxxxxxxxxxxxx
Subject: Re: {Chrysler 300} Fwd: 1962 Chrysler 300 Tail Light BezelsI used Muggy Weld Pot Metal Solder on my 300G tail light bezels to attach that vertical piece that is usually broken off and fill pit holes. I had them rechomed and on the car for over 5 years and they are fine. I practiced on some junk parts first; you have to be careful not to overheat the pot metal because it will melt. I believe they have instructions on their website and maybe some videos.
-----Original Message-----
From: info@xxxxxxxxxxxxxxxxx
To: 'Ron Waters' <ronbo97@xxxxxxxxxxx>; 'Bob Merritt' <bob@xxxxxxxxxxxxx>; 'chrysler 300 club' <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Fri, Jan 27, 2023 4:15 pm
Subject: AW: {Chrysler 300} Fwd: 1962 Chrysler 300 Tail Light Bezels
He did not tell me how he “welded” this and kept it as a secret (because everyone says it’s impossible..).Sorry can’t provide any further information…Dr. Kai RentmeisterTierarzt, DiplECVNTierärztliche Praxis für NeurologieSandäcker 797337 Dettelbach09324 – 9787630 Tel09324 – 9787635 FaxVon: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> Im Auftrag von Ron Waters
Gesendet: Freitag, 27. Januar 2023 21:14
An: info@xxxxxxxxxxxxxxxxx; 'Bob Merritt' <bob@xxxxxxxxxxxxx>; 'chrysler 300 club' <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Betreff: RE: {Chrysler 300} Fwd: 1962 Chrysler 300 Tail Light BezelsWhen your guy said 'weld', I think he meant solder. From what I understand, silver soldering is the way to fill pits. There is also an alloy that is advertised as Muggy Weld. I never investigated it, so I don't know if it is effective or not.Ron
From: chrysler-300-club-international@xxxxxxxxxxxxxxxx [mailto:chrysler-300-club-international@xxxxxxxxxxxxxxxx] On Behalf Of info@xxxxxxxxxxxxxxxxx
Sent: Friday, January 27, 2023 1:22 PM
To: 'Bob Merritt'; 'chrysler 300 club'
Subject: AW: {Chrysler 300} Fwd: 1962 Chrysler 300 Tail Light BezelsHey Folks,Greetings from Germany!I had the same problem a few years ago and found real good ones with the help of the Club (thanks again!), and I needed both sides as my old ones were broken.When I took the new ones to my Chrome guy I also took along the old ones, rather accidentally - and he said he could weld them !?!?I could NOT believe that (because usually nobody welds this kind of junk metal = Zinkdruckguß = zinc diecasting)Well he didn’t weld my bezels so far (I keep them on stock just in case) but he welded an chromed my horn ring (broken 3 times) made of the same material and it looks like new.Of course I don’t know how strong this work is - and maybe my ring once will break when some stupid driver is in front of me and I have to honk him real hard…)But the car still isn’t back on the road….What I want to say: maybe you DON’T throw away your old broken bezels because they are rare as hell, gather some and send them over to Germany if there is interest.In this case I could ask for the repair price with chroming- but this guy is not cheap….Once installed I can imagine these bezels don’t have to suffer much forces and should stay in one pieceHave a nice weekend,KaiDr. Kai RentmeisterTierarzt, DiplECVNTierärztliche Praxis für NeurologieSandäcker 797337 Dettelbach09324 – 9787630 Tel09324 – 9787635 FaxVon: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> Im Auftrag von Bob Merritt
Gesendet: Freitag, 27. Januar 2023 13:20
An: chrysler 300 club <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Betreff: {Chrysler 300} Fwd: 1962 Chrysler 300 Tail Light BezelsIf anyone can help, reply to Jared
-------- Forwarded Message --------
Subject: 1962 Chrysler 300 Tail Light Bezels Date: Thu, 26 Jan 2023 20:32:55 +0000 (UTC) From: Jared Blaylock <jmbb11@xxxxxxxxx> To: Bob,I am in desperate need of a pair of 1962 Tail light bezels if anyone can help. You can contact Jared via email jmbb11@xxxxxxxxx or telephone (904) 868-4114.Thanks in Advance--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/056f3d5a-f8a9-1064-85a4-6029f171d753%40simplexco.com.
Virenfrei.www.avast.com--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/002d01d9327c%2443af8490%24cb0e8db0%24%40tierneurologie.de.--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/E00658285A0E4065A4D5DD49871A4DB7%40ThinkPadL520.--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/006a01d93294%2486028140%24920783c0%24%40tierneurologie.de.--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/02086FBB1A1F48E6B17FCB65B4C5C604%40ThinkPadL520.