Re: {Chrysler 300} 300F Undercoating

[DeSoto Fireflite <fireflite56@xxxxxxxxx>]

On my '56 DeSoto, we tried several products and methods and ultimately settled on this product, sprayed on heavy and then blew air onto it (while wet) to create the heavier texture: https://www.restorick.com/proddetail.php?prod=Undercoat

I documented some of this somewhere in my build thread located here: http://www.forwardlook.net/forums/forums/thread-view.asp?tid=62897&start=1

I was pretty satisfied with the final results in trying to match the original.

David

On Fri, Jan 6, 2023, 7:31 PM Jay Hackleman <jhack68@xxxxxxxxxxx> wrote:

Good evening. 

Getting ready to do a 300c 

I plan on using Raptor bed liner. It comes as a 2 part product and a spray gun, nice thing if you want to undercoat the inner of the quarters inside the trunk you can tint this product as well. Most likely going to do it next week. 

Can send picture if you want of finished product. 

Sent from my iPhone

On Jan 6, 2023, at 6:09 PM, Noel Hastalis <cpaviper@xxxxxxxxxxx> wrote:

Jim,

Every so often, I’ve freshened up my driver F’s wheel wells with Dupli-Color Truck Bed Coating - on the recommendation of John Begian many years ago. Photo -

Noel

<IMG_2806.jpeg>

Sent from my iPhone

On Jan 6, 2023, at 5:04 PM, Jim Birr <jebirr@xxxxxxxxx> wrote:

My car is getting ready to come off of rotisserie (yeah) and shop wants to paint and undercoat it's belly (undercarriage) before it comes off.

Conversations with Jamie Hyde indicated 

• Under side is body color! Everything including the wheel houses, then undercoated. Fender liners are body color. 
• Texture a bit rougher than rattle can stuff and not as dull as.

So my question to the group - any recommendations on product to use?  May not be a concours car when done but don't want to do anything to preclude it - especially something relatively simple like this.

Thanks

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/0e0e050a-b512-4834-9b00-0154677243adn%40googlegroups.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/5FFA4969-65EF-4311-8D23-847DA7855D68%40comcast.net.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/20B36A39-1BAE-436C-B26F-62C71E6BCFA2%40comcast.net.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CALaZGBP-%3DCDMpM1Za2ookSWu5YEigxFL4C%3Douz5rhJcf382FLQ%40mail.gmail.com.