IIRC there is a leaded joint right there in the corner that joins the left side of the surround to the center part where the latch is So, it is not just one big piece but 2 From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of finsruskw@xxxxxxxxxxxxxxx I just checked and the rear trunk lip panel I had for years is gone. From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of finsruskw@xxxxxxxxxxxxxxx Would that be the same profile or shape as a 60 or 62? If so, I may have what you need. From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of dplotkin@xxxxxxxxxxxxxxxxxxx Unless someone has a donor piece you need to have that made which is no big deal for a good fabricator which must exist in Georgia. My restorer in CT (Labrecque Autocraft) routinely fabs sheet metal along those lines for rare cars. Not cheap but far from impossible. Danny Plotkin -----Original Message----- Vin#8413133774 ISO patch pieces or anyone that can repair. I'm in Georgia. Willing to move the car to repair
-- -- -- -- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/012501d92147%247b8552f0%24728ff8d0%24%40iowatelecom.net. |
Back to the Home of the Forward Look Network
Archive Sitemap
