Hi Ron, I haven’t removed the glass yet, I need to do some slight rust repairs around the rear screen. I’m concerned with getting the glass out without breaking the glass so thought I would
cut the rubber. The front shield I wanted to clean up the edges for painting, but I think I will leave it alone after hearing that. Any hints on removing rear glass? Wayne From:
chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> on behalf of Ron Waters <ronbo97@xxxxxxxxxxx> Here's the deal: You can't. They are not reproduced. The repro stuff you see from 'major vendors' is junk. It's generic and doesn't work. If yours is in fairly good
shape, recondition it. If someone along the way expedited glass removal by cutting the rubber, that was a major mistake. So here's what can be done: For the windshield, understand that it's a W451, which means that any Mopar 2dr hardtop or 4dr hardtop from
1957, except Imperial, also uses the same gasket. Also, 1958 Plymouth hardtops retained the W451 windshield while the other makes went to the later W453. So you have to get one from a parts car. Regarding the rear glass, any senior model 2dr HT that has the
large rear window will use the gasket that you need. Are these very desirable candidates for reproduction ? YES ! Ron From: chrysler-300-club-international@xxxxxxxxxxxxxxxx [mailto:chrysler-300-club-international@xxxxxxxxxxxxxxxx]
On Behalf Of Wayne Bakewell Hi, I am wanting to know where I can buy new front and rear windshield rubbers for our 57 300c. Regards, Wayne -- -- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/SYCP282MB0207376CDC0A3FC75020C0E5EDF59%40SYCP282MB0207.AUSP282.PROD.OUTLOOK.COM. |