Re: {Chrysler 300} 64 quarter window removal

Allan,

I am absolutely having a similar issue on my 65 2 door hardtop. I have a rebuilt motor, but in trying to put it against the regulator assembly the motor holes do not align perfectly with the regulator holes. I need help as I do not want to get killed taking this assembly out. Lets talk Tuesday or Wednesday?

Ron Klinczar

65 300

716-954-0121

On Mon, Jan 2, 2023, 4:04 PM <apozdol@xxxxxxxxxxx> wrote:

Can I ask for a little advice about removing the power rear quarter window on a 64 two door hardtop? The manual doesn’t address the power window removal precisely.
Does the front rail have to be removed along with the glass to get the glass out?
Is the glass all the way down as the manual states to disconnect the rear roller?
Look what I found when I removed the plastic. Two of the bolts were never tightened down at the factory! And the factory rustproofing was everywhere but at the bottom wet spots!

Allan

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/003201d91eed%24c33eb750%2449bc25f0%24%40comcast.net.