{Chrysler 300} 300K single 4 BBL air cleaner rod
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

{Chrysler 300} 300K single 4 BBL air cleaner rod



Hi all,

 

I got my stock air cleaner from Murray and have some air filters inbound. But Murray did not include the threaded rod. Can someone take on out of theirs and measure it for me and tell me the diameter and thread pitch? I will order some threaded rod and cut it to fit.

 

I vaguely remember that the stock rods were just threaded on the ends. If that is the case then can you also tell me how long the threaded in in both ends. At some point I will get and die some solid rod to duplicate it.

 

Thanks, James

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB61713B8869EEB1EACC94C71793F09%40CY5PR19MB6171.namprd19.prod.outlook.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.