Re: {Chrysler 300} 57 C intake

[William Huff <whuff@xxxxxxxxxx>]

I've seen that with dowels used as locating pins when matching intake to heads when porting is done.

Bill Huff

On 12/22/2022 6:51 PM, jslayton@xxxxxxxxxx wrote:

>       
>       I am working on a 300C and when I went to take the intake off I
>       noticed that in each---all 4----recessed areas along side of
>       manifold there is a drilled hole------no threads and hole goes all
>       the way through----I have never seen this before------anyone know
>       why this was done ?--------THANKS----------Johnnie
>       -- 
>       For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
>       --- 
>       You received this message because you are subscribed to the Google
>       Groups "Chrysler 300 Club International" group.
>       To unsubscribe from this group and stop receiving emails from it,
>       send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
>       To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/41ab0d613f10f54eefea87309ead3c1699b16ed8%40webmail.
>

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/f007c97c-8ae2-340b-ada9-bfd1182fdb22%40cfl.rr.com.