FYI , that clock spring rate differs , if you have 150 speedo , you cannot use “120 guts “ to fix . For sure on F Did that —-huge waste of time . Spring “ rate “ on 150 differs , does not track scale with 120 guts . DONT touch clock spring !!!! Ever for any reason . Once bent in any way you are done . Ps , I learned 1000 rpm input is 60’mph on almost all speedo . Use white tape strip on drill chuck and optical rpm reader . I use toothpick in chuck to drive it But with wrong ( 120 ) clock spring rate it will not track on 150 scale . Cannot be “adjusted “ to track 150 FYI , jkg
-- Sent from my iPhone On Dec 19, 2022, at 6:56 PM, Gary <garythepartsdoc@xxxxxxxxxxxx> wrote:
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/56134BA4-1AE1-4C7F-84FE-A625CF770791%40gradyresearch.com. |