{Chrysler 300} 1962 Sport - Side Mirror Removal
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

{Chrysler 300} 1962 Sport - Side Mirror Removal



Howdy,

I need to pull the drivers side mirror.
It’s been 20+ years since I did this (simple) task.

I read the shop manual.
I’ve watched the Bob Merritt video (for a 1964 model).
I’ve read the Larry Jett article on the club site (for a 1964 model).

I have undone the toggle from the dash & backed it towards the firewall hole.
The toggle, with cables, will NOT fit through the firewall hole (unless I were to maybe file down the toggle cable back piece).
So I need to remove the cables from the toggle back piece.
I already have the cables released from the toggle itself.

I need to twist open the cable crimp sections to release the cables; right?
Any helpful hints on tweaking the cable holders open a bit to release them?
Without the risk of jamming a flat blade screwdriver into my hand….thought others may have a better method.

Thanks!
Matt Allyn

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/2AC5AADB-7DE0-430B-B727-2B6253F74C8C%40yahoo.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.