{Chrysler 300} 1964 300K single 4bbl intake throttle return spring brack
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

{Chrysler 300} 1964 300K single 4bbl intake throttle return spring bracket



Hi all, I hate it when previous owners, even one owner family cars, get into the engine bay and muck things up. This car had an Edelbrock carb and in the switch, they pulled off the factory return spring bracket. I just found that out then I went to put on the rebuilt 3614S I sourced and rebuilt.
 
There is a guy selling a bracket on ebay that may work but it is not correct looking.
 
If anyone has a spare throttle return bracket, they want to part with let me know. I am headed back to San Francisco tonight and will order the ebay bracket if nobody has one handy. I then will check with the usual suspects to find the correct one down the line. I just do not want this to hold up the final push next week to get this back on the road and shake it down to figure out what else needs work.
 
Thanks all, James
 
 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB617167EDC36FB27F5DC285A893019%40CY5PR19MB6171.namprd19.prod.outlook.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.