Re: {Chrysler 300} Enclosed Trailer-Get a "one-piece" roof

[Jim Birr <jebirr@xxxxxxxxx>]

Thanks for all the feedback.  Still shopping and looking.  Kinda on the fence now and may go with aluminum open trailer (hydraulic tilt) with stone guard, L-track etc .   Will see how the numbers add up.  Thanks again

On Tuesday, November 1, 2022 at 11:43:47 PM UTC-5 ldmiklas wrote:

Be sure to specify a "one-piece" roof if your trailer will be sitting outside. This will be included on most high end trailers.

JM

On Tue, Nov 1, 2022 at 11:07 AM jebirr <jeb...@xxxxxxxxx> wrote:

I am considering purchasing an enclosed trailer for my 300F and possible new 300 addition.  Online searches list 300-F at 219.20 inches.  Other car is 220.2.  So this comes out to around 18' 4.2" max length.  

I want to make sure I get a long enough trailer and my F is torn apart so I can't check.  I assume these measurements are tip of bumper to tip of bumper but you know what they say about assuming anything.  So are these measurements tip to tip?  max length?

Any other recommendations on features?  I am absolutely going to get an "escape door".  Trailer I'm considering is 24' interior.  Which leaves around 5' 8" of room.  Not worried about lashing down the back end.  wondering if this is enough to crawl under and lash down front left tire.  Any words of wisdom from 300 members with enclosed trailer appreciated.

Thanks

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/037bc6b9-5f54-426d-90e9-dc5b66a1d8ben%40googlegroups.com.