On the 1964 300K did Chrysler use a TRW Pump or a Federal Pump? I am going to just buy the parts and rebuild it myself. But, before I start to order parts by NOS part number I want to make sure that they are for the pump I have in hand which is a TRW 197. Thanks, James From: 'James Douglas' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Hi All, Since I have the front of the engine cleaned off, I am placing a new water pump, alternator and the like on the car. I want to put on a new power steering pump. I see that NAPA and the like are not listing them. Some have ½ done pumps where you must transfer parts across. Does anyone have a supplier and part number for a complete new or rebuilt pump with reservoir and pulley? If not, then I may as well get a kit and rebuild this one myself. Thanks, James PS. Lars wants a $500 core charge! -- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB6171B352A1C6087C1C3C8CB2933C9%40CY5PR19MB6171.namprd19.prod.outlook.com. |