{Chrysler 300} Hayden Fan FYI

["'James Douglas' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

I did a first try on my fan and Hayden clutch today. Preliminary fit looks good. It fits and clears and is approximately 50-50 with respect to the fan blades and the shroud.

What I did notice is that the supplied bushing for the water pump hub IS TOO LONG. If you place a straight edge on the busing in the Hayden Clutch it is higher than the bolt face. If you do not catch it, it can cock the fan.

I will cut it down so that it is flat. FYI on this everyone.

James

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB6171AD146CC94A3CDC8A889F932F9%40CY5PR19MB6171.namprd19.prod.outlook.com.

Attachment: Image.jpeg
Description: Image.jpeg