13/64” ID Ring Connector or 5 mm. Stud mic’s at 0.184”/4.7 mm #10, I believe-nominal 0.190” Rich Barber From: 'James Douglas' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> Hello all, I am making up a harness to use one of the digital dash voltage regulators. I am in San Francisco. The car is 80 miles out of town at our other residence. Anyone know off the top of their head, or have a gauge nearby, what the stud size is so I can get the correct ring terminal in my little harness? I am soldering and shrink tubing the ends. I have a dozen different ring terminals sizes, hole wise, but I do not want to use one too big. I really do not want to have to do a 160 round trip to measure that stud! Thanks, James -- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/002801d8e4d9%2485246260%248f6d2720%24%40ez2.net. |
Back to the Home of the Forward Look Network
Archive Sitemap