Re: {Chrysler 300} 300F Cam Timing

[Noel Hastalis <cpaviper@xxxxxxxxxxx>]

Hello Dyke,

I've attached Camcraft's spec sheet - hope this helps. I had the 413 in my 300-F rebuilt over this past winter. Purchased and installed a new cam and lifters from Camcraft, among other engine components. To discuss further, you can call Hunter Webb at Camcraft - (828) 681-5183.

Noel Hastalis

On 10/18/2022 8:57 AM ridgleyracing65 <ridgleyracing65@xxxxxxxxx> wrote:

Does anybody have the specs for the Factory 300F camshaft at .050" lobe lift. The "advertised' specs are listed in the factory tech literature, but I have not seen the specs at .050" lift. I know a firm called Camcraft is supposed to offer a replacement for the factory cam but I have not found their specs published anywhere.

Dyke Ridgley

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/b559e0fe-33c1-4381-ac22-84039eca3aban%40googlegroups.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1040144727.295840.1666112912620%40connect.xfinity.com.

Attachment: Camcraft cam specs.jpg
Description: JPEG image