Re: {Chrysler 300} Vac advance tubing on F and G

["'Charlie V' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

I bought mine from Gary Goers so check with Quirey as they may now have it.

Charlie Valentine

On Wednesday, September 28, 2022 at 07:15:44 PM EDT, Bob Jasinski <rpjasin@xxxxxxxxxxx> wrote:

Anyone have a source for the plastic 3/16” OD distributor vacuum advance line for the F & G? 

Second question, will a brake line flaring tool work to make the flare that goes into the base of the carb?

 

Bob J

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/003301d8d390%2430f95e70%2492ec1b50%24%40comcast.net.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1497148708.1248332.1664441667773%40mail.yahoo.com.