Reminds me of the first and last time I tried to weld./braze cast iron in metallurgy class. Other students weldments were put in a vise and broken with a hammer blow The instructor broke mine with his fingers--like breaking an Oreo cookie in half. It worked out better when I hired welders to keep our pipelines together. Rich B. in Sunny CA—maybe even some rain comin’. From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of 93saturnfan Well after a bit of a runaround with shipping, my exhaust manifold finally showed up this morning. Unfortunately to my horror it was in far worse shape than when I shipped it out. The entire manifold is now completely broken in half and there are a few little pieces of it as well that came from the middle of the break. I'm absolutely devastated as I now worry that it may be beyond saving. Ryan Stevenson -- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/026001d8c962%2484fb4f70%248ef1ee50%24%40ez2.net. |
Back to the Home of the Forward Look Network
Archive Sitemap