{Chrysler 300} Starters

["D.C. Mason" <petergriffinforpresident@xxxxxxxxx>]

Hello group,

I’m sure someone has tried this before and knows the answer.  I didn’t see a tech article on the website addressing it:

There is a difference, in mounting method at least, between 60-61 starters and 62-65 starters.   The flange on the newer starters has a couple non-threaded mounting holes.  The flange on the older style has one non-threaded hole and one threaded hole.  
The question, as you have probably guessed, is can a newer starter be used on a 60-61, even temporarily?  Normally the top bolt threads into the starter flange of an older starter, but you could just use a bolt and nut if installing a newer starter with non-threaded top hole.  

There may (?) also be advantages to using a newer type starter.  I am curious about any advantages or disadvantages.  

Thanks,
dave

Sent from my iPhone

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/9FB71CB1-48D8-4D52-818F-A789074CC406%40gmail.com.