RE: {Chrysler 300} hood to core support shield 63-64

[Carl <cbilter@xxxxxxxxx>]

Yes, I think you are referring to the cowl to hood seal, Goers part #W27, but it should be 8 holes.

 

Carl Bilter

 

From: apozdol@xxxxxxxxxxx
Sent: Sunday, September 11, 2022 1:30 PM
To: 'Chrysler 300 Club International'
Subject: {Chrysler 300} hood to core support shield 63-64

 

I am wondering if the 63-64 Chryslers had a rubber shield mounted at the front of the hood latch/grill support panel. There are six holes across the front, so why are they there?

I see other shields in the Goers catalog, one for 61-62 Chryslers and a 66 Dart all with six holes. The 65-68 have eight holes.

I looked around in the online parts catalog but did not find anything.

What’s them holes for? For AC cars? I have AC.

Allan

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/001c01d8c60c%2497baf970%24c730ec50%24%40comcast.net.

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/631e7fc4.ca0a0220.6d7ef.187aSMTPIN_ADDED_MISSING%40gmr-mx.google.com.