Re: FW: {Chrysler 300} 64 radio fader/reverb unit
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: FW: {Chrysler 300} 64 radio fader/reverb unit



The unit just delays the signal from the Radio a few Microseconds to give an echo.
Sorta like Les Paul's Music (who remembers that?)

Like Danny mentioned, you would have audio in and out. Just disconnect, and join those wires to bypass the Reverb unit.
My L had this feature under the package shelf, but it's been toooo many years ago. While you have it bypassed, look into having the unit serviced, either at a local old time radio shop or with one of the vendors in the Club's publications.
Ray



On Fri, Sep 2, 2022 at 11:01 AM Dan Plotkin <dplotkin@xxxxxxxxxxxxxxxxxxx> wrote:

 

 

From: Dan Plotkin [mailto:dplotkin@xxxxxxxxxxxxxxxxxxx]
Sent: Friday, September 2, 2022 10:54 AM
To: 'Dave Dumais' <dave.dumais@xxxxxxxxx>
Subject: RE: {Chrysler 300} 64 radio fader/reverb unit

 

Dave-

You likely have a Motorola Vibrasonic which the big 3 used with various names of their own. Should be nothing more than a box with 12 volt and ground supplied, and audio in and out connections. These are transistorized. I have one in a 63 Galaxie XL. My bet is a wiring problem. If it’s the unit John Grady may have some advice. Any old car radio guy should be able to fix it if the problem is inside.

 

Danny Plotkin

 

From: 'Dave Dumais' via Chrysler 300 Club International [mailto:chrysler-300-club-international@xxxxxxxxxxxxxxxx]
Sent: Wednesday, August 31, 2022 1:35 PM
To: Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} 64 radio fader/reverb unit

 

My 64 K has an am/fm radio.

 

It has the reverb unit in trunk for rear speaker.

 

And, it stopped working a few years back.

 

Figures 11 thru 13 in the factory Manuel has

Some wiring details.

 

I figure to disconnect reverb and get the rear speaker to play.

 

Has any one dealt with this issue?

 

Good winter project to pull seats and console the trace the wiring.

 

Thanks,

 

In Dave's garage

 

 

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1685404377.1353983.1661967317197%40mail.yahoo.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/000201d8bedc%24dfbd0920%249f371b60%24%40northeastretail.com.


--
Ray Jones. Y'all come on down an see us. Ya hear?

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAD72c-w5f%2BGCB1_y1H6nekiq1dH4CfxBuHO3GV55HmBfpocGhA%40mail.gmail.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.