Re: {Chrysler 300} F Manifold

[Ryan Hill <ryan_hillc300@xxxxxxxxxxx>]

In my opinion, the task is nearly impossible. There has been discussion on this topic in the past and I don’t recollect anyone having more than short term success with a manifold. The process requires the manifold to be heated to an almost molten state before a weld can be successful. 

Ryan Hill

On Aug 10, 2022, at 3:56 PM, 93saturnfan <93saturnfan@xxxxxxxxx> wrote:

Well I received a call from the welding shop I took my broken manifold to today. They were able to weld it together but upon striking it with a hammer to make sure it held, it cracked again. Then the welder suggested I use JB weld to fix it. I don't know if it cracked along the weld or elsewhere as I haven't seen it yet but I plan on picking it up tomorrow and taking my business elsewhere. 

Does anyone in the Midwest or Southeast Wisconsin area have any recommendations of a welding place that can handle a cast iron manifold? 

Thank you in advance.

Ryan Stevenson 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/62f43782.020a0220.8fe4f.a944%40mx.google.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/MW3PR16MB3932A129957E4923D4CE9EEAC5649%40MW3PR16MB3932.namprd16.prod.outlook.com.