| I think that stuff is bad , factory or not . Many 300 I have dealt with ( and Mercedes fancy rubber anti rust) are solid rust on top of the often difficult to get off undercoating . It only adheres in spots . Looking back over the years , best antirust thing is find low place with water in the floor drops while restoring and drill a 1/4 hole there . Maybe cement stainless washer around it from underside , attached with 6:32 brass or stainless screw . Then paint heavy with rustoleum . Rusty Jones all that stuff was just a $ ripoff . Keeping water out also means keeping water in , sitting under constantly wet rug padding on the other side.. the real problem . Mho J
-- Sent from my iPhone On Aug 8, 2022, at 12:24 PM, Ron Kurtz <mark6268@xxxxxxxxxxxxx> wrote:
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/A7B99AE7-81ED-47D3-AB23-C92F853DE837%40gradyresearch.com. |
Back to the Home of the Forward Look Network
Archive Sitemap