Re: {Chrysler 300} FW: Chrysler 300 1964
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: {Chrysler 300} FW: Chrysler 300 1964



The 400 HP F's used water heated rams. The headers did not have provisions for exhaust heat. 62 is a shorter wheelbase than 60-61, and the reduction is in the front. That may have something to do with TTI header fit. 

Don


Hi Rich .
I have a 62 with 405 clone , the mc is the same setup as an F . It also has air , guy before me was ambitious .He did a better job than factory . 
I also looked carefully at “ Big Red” at the Pa meet ; 62 405 with manual brakes and also water heated carbs . More of a race car setup but I liked it . Frees up exhaust options and no struggles with exhaust heat problems . 
FYI manual brakes with correct  manual pedal ratio setup from a dodge ( fits) and stock 12 “ drums is not too bad . Good even . 
However even correctly done manual brakes and any disc conversion are a horror show imho . Very hard pedal , and it travels a few inches first due to very high brake fluid requirement ( cc) of the large disc puck cylinders  compared to drum cylinder piston surface area . No amount of bleeding etc fixes that . Been there . Lesson learned . That car ended up with larger bore corvette master ( big but fits with redrilling , with no boost , non ram ) to reduce travel , but that makes pedal even harder .
Lesson learned … 
Back to first question , I think 60-62 exactly the same engine bay ? Right ?
I ask , as often headers ( like TTI ) are listed 62 up , why not 60 ? Something else hits? 
Anyone know? 
What was on 400 hp F for carb heat and brake mc ? 

Sent from my iPhone

On Aug 2, 2022, at 1:35 AM, Rich Barber <c300@xxxxxxx> wrote:


Noel & All:
 
I recall the meet, the car, the young woman owner and her father who had helped prepare the car—all from TX.  I think the car was concours judged. 
 
Amazingly, their original FirePower 360 engine had been equipped with short rams.  The outlet piping of the original boosted master cylinder had been re-routed downward and the horizontal outlet plugged.  This left about 3/8” clearance between the LH ram assembly and the MC plug.  I have a picture of same “somewhere”.
 
So, this brings up a question I have on a ’62 300 with a long(?) ram optional engine—if ever one existed.  Did they use the remote MC then as was later used on J’s & K’s? Inquiring minds want to know.
 
Rich Barber
Brentwood, CA
 
From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of Noel Hastalis
Sent: Monday, August 1, 2022 6:20 PM
To: Allan Klotz <allan.klotz@xxxxxxxxxxxxxxx>
Cc: Chrysler300 <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} FW: Chrysler 300 1964
 
Hello Allan,
 
Here are photos of a beautiful '64 300-K Silver Special that came to our Fall 2012 Golden (Denver), Colorado 300 Club Meet - attached.
 
Noel
 
On 08/01/2022 2:33 AM Allan Klotz <allan.klotz@xxxxxxxxxxxxxxx> wrote:
 
Hi
One of my friends has bought the car on the photos below. Somebody has told him that it is a 300 Silver Special. The paint code is 229. Can anyone confirm if it is a Silver Special or tell me what else it can be?
Your assistance is highly appreciated.
Thanks
Allan
 
Mvh. 
Mathias Neumann Olsen 
Mobil 20 35 89 42
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/62e78233.050a0220.a286d.1071SMTPIN_ADDED_BROKEN%40gmr-mx.google.com.
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1509892889.93488.1659403205833%40connect.xfinity.com.
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/003101d8a631%24a835b510%24f8a11f30%24%40ez2.net.
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/910A99B5-39A9-42EC-8C18-8369493435AC%40gradyresearch.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/2139500434.2972299.1659444085172%40mail.yahoo.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.