Elaina, A couple things, first off, your subject line states “canvas boot”. In America, the “boot” is the covering for the top when the top is in the retracted position behind the rear seat. Regarding the convertible top fabric, your ’67 Chrysler original top was most likely a pin point vinyl or a vinyl grain material, not canvas. Are you planning on installing the top kit yourself, or are you really just looking to find an installer that can match and install a new top? Have you sought out any local trim shops and/or brought your car to them to have a look? There are companies that make original replacement top kits, look in Hemmings.com for suppliers, but letting a local trim shop seek out the kit may be better because they are the ones installing it. Installing a top is not easy and tough to get right. They may also be able to make a new boot for you as well. Bob J From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of Elaina Wolfe Elaina here, I am looking for a place that either sells or makes a canvas top for my 1967 Chrysler 300 convertible. Thank you, Elaina -- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/000001d8a367%24ab3b2a50%2401b17ef0%24%40comcast.net. |
Back to the Home of the Forward Look Network
Archive Sitemap