{Chrysler 300} Body off frame

[Ron Kurtz <mark6268@xxxxxxxxxxxxx>]

Hello, everyone:

Next step on E #292 is to raise the body off the frame. Before I lift the body, I checked the service manual for alignment instructions to square the two for proper alignment. The instructions are not detailed. 

I can use diagonal measurements of body to opposite points of the front of the frame as I did on my '64 Newport (sheet metal fitted perfectly) but not sure with the full frame on the '59. 

Any suggestions would be greatly appreciated.

Best,

Ron Kurtz 

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1037777320.1236048.1658711231843%40mail.yahoo.com.