Re: {Chrysler 300} 1962 - Trans Issue
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: {Chrysler 300} 1962 - Trans Issue



Are you sure that you got the right oil in it. Sounds like the oil is to thick causing to much oil pressure and thins when it gets warm lowering the oil pressure???.

Sent from my iPhone

On Jun 18, 2022, at 8:06 AM, Henry Schleimer <henry.schleimer@xxxxxxxxxxxxxxx> wrote:



I recall from service manuals that the first step in ensuring a correct  transmission shift is to make sure the engine is properly tuned.  The trans expects the engine to be putting out a certain amount of torque at a certain speed and at a certain throttle position (or vacuum level if vacuum controlled).  May be your cold engine/choke settings are off if it shifts properly when warm.  I don’t expect perfect shifts when cold on an old engine because it is hard to get the choke perfect.

 

Chrysler 300’s are special but aren’t as unique as some people think.  Getting the engine right first applies to most trannys.  If the trans and linkages are ok, you may be chasing the wrong problem.

 

Henry

 

 

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx [mailto:chrysler-300-club-international@xxxxxxxxxxxxxxxx] On Behalf Of dplotkin
Sent: Sunday, 19 June 2022 12:09 AM
To: Matt Allyn; 300 Club
Subject: RE: {Chrysler 300} 1962 - Trans Issue

 

Don Verity is the guy to answer this one, hopefully he will be along soon. In my experience failure to shift cold that abates once at operating temperature is hardened or leaking seals and not an adjustment. Short shifting is generally a sign of maladjustment of the TV rod. 

 

Most transmissions are highly sensitive to TV rod adjustment, a half turn too much or too little will cause big swings in shift timing and quality.  

 

My comments are subject to correction by Mr. Verity.

 

Danny Plotkin

 

 

 

Sent from my Verizon, Samsung Galaxy smartphone

 

 

-------- Original message --------

From: 'Matt Allyn' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>

Date: 6/18/22 2:56 AM (GMT-05:00)

Subject: {Chrysler 300} 1962 - Trans Issue

 

Wanted to pick the brains of those much more knowledgeable than I am :).

 

Working with my ’62 300 Sport which has:

- Rebuilt torque flight.

- New shifter cable.

- Have adjusted the shifter cable (at the trans) per the shop manual.

- Have adjusted all carburetor to transmission linkage specs multiple times per the shop manual.

 

 

The problem:

- Car does not wish to shift from 1st to 2nd, when cold.  It’s almost as though I need to mash the pedal to the floor to get it to shift.

(This seems to be that the Transmission Lever being out of adjustment; right?)

- But...Once car warms up it shifts perfectly fine.

 

Are there other adjustments I need to consider?

(Like bands perhaps?)

 

Thanks!

Matt Allyn

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/95497B80-8B72-46F7-99A9-6781A2EA1E24%40yahoo.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/62addc8f.1c69fb81.86fe4.e846SMTPIN_ADDED_MISSING%40gmr-mx.google.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/62ade9ec.1c69fb81.d8842.d8d3SMTPIN_ADDED_BROKEN%40gmr-mx.google.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/67C49B35-7166-4BA8-AA51-0695E7C5CDCB%40aol.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.